Dell PowerVault MD3260 Series Manual de configuración - Página 9

Navegue en línea o descargue pdf Manual de configuración para Almacenamiento Dell PowerVault MD3260 Series. Dell PowerVault MD3260 Series 17 páginas. Dell powervault md3260/3260i/3660i/3660f/3060e storage arrays
También para Dell PowerVault MD3260 Series: Manual de hardware y software (25 páginas), Manual de instalación (11 páginas), Manual de introducción (10 páginas), Información actualizada (8 páginas), Instrucciones de instalación de la estantería (2 páginas), Puesta en marcha (2 páginas), Manual de implantación (26 páginas), Manual de implantación (24 páginas), Manual de introducción (9 páginas)

Direct-Attached Cabling

Direct-attached cabling configurations provide simple, non-switched connections between the host server and storage

array. Redundancy is achieved in a direct-attached configuration if two RAID controllers are installed in the storage

array and multiple paths between the host sever and storage array are established.

A single RAID controller, direct-attached configuration is supported, but is not recommended due to the low level of

redundancy offered.

Single Controller Configurations

The following figures show two and four host servers, each connected to one RAID controller module. The host servers

share storage space without redundant paths. If one path fails, the host server on that path is disconnected from the

storage array.

NOTE: The MD Series Dense storage arrays do not support single-controller (simplex) configurations.

Figure 2. Two Host Servers With Dual Port HBAs Connected to a Single-Controller Storage Array