Dell PowerVault MD3260 Series 구성 매뉴얼 - 페이지 9

{카테고리_이름} Dell PowerVault MD3260 Series에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3260 Series 17 페이지. Dell powervault md3260/3260i/3660i/3660f/3060e storage arrays
Dell PowerVault MD3260 Series에 대해서도 마찬가지입니다: 하드웨어 및 소프트웨어 매뉴얼 (25 페이지), 설치 매뉴얼 (11 페이지), 시작하기 매뉴얼 (10 페이지), 정보 업데이트 (8 페이지), 랙 설치 지침 (2 페이지), 설정 (2 페이지), 배포 매뉴얼 (26 페이지), 배포 매뉴얼 (24 페이지), 시작하기 매뉴얼 (9 페이지)

페이지 인쇄
Dell PowerVault MD3260 Series 구성 매뉴얼

Direct-Attached Cabling

Direct-attached cabling configurations provide simple, non-switched connections between the host server and storage
array. Redundancy is achieved in a direct-attached configuration if two RAID controllers are installed in the storage
array and multiple paths between the host sever and storage array are established.
A single RAID controller, direct-attached configuration is supported, but is not recommended due to the low level of
redundancy offered.
Single Controller Configurations
The following figures show two and four host servers, each connected to one RAID controller module. The host servers
share storage space without redundant paths. If one path fails, the host server on that path is disconnected from the
storage array.
NOTE: The MD Series Dense storage arrays do not support single-controller (simplex) configurations.
Figure 2. Two Host Servers With Dual Port HBAs Connected to a Single-Controller Storage Array
9