Dell Force10 MXL 10 GbE Manual - Página 18

Navegue en línea o descargue pdf Manual para Interruptor Dell Force10 MXL 10 GbE. Dell Force10 MXL 10 GbE 27 páginas. 10/40gbe blade switches
También para Dell Force10 MXL 10 GbE: Manual de introducción (38 páginas)

Imprimir página

1. Restoring Factory Defaults

Stacking Dell Force10 MXL 10/40G Switches

4 Member

5 Member

Issue show system stack-port status command to see the topology and link status for each port.

FTOS#show system stack-port status

Topology: Daisy chain

Interface

----------------------------------------------------------------------------

0/33

0/37

0/41

0/45

1/33

1/37

1/41

1/45

2/33

2/37

2/41

2/45

3/33

3/37

3/41

3/45

Note: Each stack members' role (including the Master and Standby) can be redefined by the user at any

time by setting the Priority values and reloading the stack.

Logical provisioning of a unit in a stack

If desired, a stack-unit number can be pre-allocated and applied to an MXL switch added to the stack

at a later date. This pre-configuration is stored on the Master switch and applied once the stack unit is

added. When you provision a unit number for an MXL 10/40GbE Switch:



The base-module ports on the switch (ports 33 and 37/stack groups 0 and 1) are pre-configured for

40GbE operation.



The 40GbE ports on FlexIO expansion modules (ports 41 and 45 in slot 0; ports 49 and 53 in slot 1)

are pre-configured for 4x10GbE (quad mode) operation.

Once logical provisioning of a unit has been applied using the commands below, configurations can be

made on that unit as if it were an actual physical unit.

FTOS(conf)#stack-unit 1 provision ?

MXL-10/40GbE

FTOS(conf)#stack-unit 1 provision MXL-10/40GbE

online

MXL-10/40GbE

online

MXL-10/40GbE

Link Speed

Admin

(Gb/s)

Status

34-port GE/TE/FG (XL)

MXL-10/40GbE

8.3.16.0E0 56

MXL-10/40GbE

8.3.16.0E0 56

Link

Trunk

Status

Group

down