Dell Force10 MXL 10 GbE Manual - Page 18
Browse online or download pdf Manual for Switch Dell Force10 MXL 10 GbE. Dell Force10 MXL 10 GbE 27 pages. 10/40gbe blade switches
Also for Dell Force10 MXL 10 GbE: Getting Started Manual (38 pages)
Print Page
Stacking Dell Force10 MXL 10/40G Switches
4 Member
5 Member
Issue show system stack-port status command to see the topology and link status for each port.
FTOS#show system stack-port status
Topology: Daisy chain
Interface
----------------------------------------------------------------------------
0/33
0/37
0/41
0/45
1/33
1/37
1/41
1/45
2/33
2/37
2/41
2/45
3/33
3/37
3/41
3/45
:
Note: Each stack members' role (including the Master and Standby) can be redefined by the user at any
time by setting the Priority values and reloading the stack.
Logical provisioning of a unit in a stack
If desired, a stack-unit number can be pre-allocated and applied to an MXL switch added to the stack
at a later date. This pre-configuration is stored on the Master switch and applied once the stack unit is
added. When you provision a unit number for an MXL 10/40GbE Switch:
The base-module ports on the switch (ports 33 and 37/stack groups 0 and 1) are pre-configured for
40GbE operation.
The 40GbE ports on FlexIO expansion modules (ports 41 and 45 in slot 0; ports 49 and 53 in slot 1)
are pre-configured for 4x10GbE (quad mode) operation.
Once logical provisioning of a unit has been applied using the commands below, configurations can be
made on that unit as if it were an actual physical unit.
FTOS(conf)#stack-unit 1 provision ?
MXL-10/40GbE
FTOS(conf)#stack-unit 1 provision MXL-10/40GbE
online
MXL-10/40GbE
online
MXL-10/40GbE
Link Speed
Admin
(Gb/s)
Status
40
up
40
up
40
up
40
up
40
up
40
up
40
up
40
up
40
up
40
up
40
up
40
up
40
up
40
up
40
up
40
up
:
:
34-port GE/TE/FG (XL)
MXL-10/40GbE
8.3.16.0E0 56
MXL-10/40GbE
8.3.16.0E0 56
Link
Trunk
Status
Group
up
up
down
down
up
up
down
down
down
up
down
down
down
up
down
down
:
16