Dell Force10 S4810 Manual de implantación - Página 32
Navegue en línea o descargue pdf Manual de implantación para Interruptor Dell Force10 S4810. Dell Force10 S4810 36 páginas. Dell force10 s4810 switch
También para Dell Force10 S4810: Manual de inicio rápido (27 páginas), Manual de configuración (17 páginas), Manual de configuración (17 páginas)
Imprimir página
Usage
This is a vendor-specific CLI.
Information
Related
openflow of-instance
Commands
of-instance (Interface)
Add a physical interface or LAG to an OpenFlow instance.
Z-Series, S4810
Syntax
of-instance of-id
Parameter
of-id
Command Modes
INTERFACE MODE
Command History
Version 9.1(0.0)
Example
In the following example, the ports Te 0/7 and Te 0/31 are associated with of-instance 1:
FTOS(conf)#interface tengigabitethernet 0/7
FTOS(conf-if-te-0/7)#of-instance 1
FTOS(conf-if-te-0/7)#interface tengigabitethernet 0/31
FTOS(conf-if-te-0/31)#of-instance 1
FTOS(conf-if-te-0/31)#
Usage
To enable OpenFlow, associate a port or a VLAN to an OF instance. Ports and VLANs must be
Information
associated when the OF instance is created and in a "shut" state (shutdown).
LAGs or port-channel interfaces are supported as of-ports or of-vlan members on OpenFlow.
By default, all ports are available for legacy functionality.
The following features are not supported on physical interfaces associated with an OpenFlow
instance:
•
•
•
•
•
•
•
•
•
•
The following features are not supported on LAGs associated with an OpenFlow instance:
•
32
Create or modify an OpenFlow instance.
Enter the OpenFlow instance ID. Range is 1 to 8.
Introduced on Z9000 and S4810.
Dot1x
Ethernet
GVRP
IPv4
IPv6
MAC
MTU
Port-channel protocols
Spanning-tree protocols
Switchport
Ethernet