- ページ 32
スイッチ Dell Force10 S4810のPDF 配備マニュアルをオンラインで閲覧またはダウンロードできます。Dell Force10 S4810 36 ページ。 Dell force10 s4810 switch
Dell Force10 S4810 にも： クイック・スタート・マニュアル (27 ページ), 設定マニュアル (17 ページ), 設定マニュアル (17 ページ)
ページを印刷する
Usage
This is a vendor-specific CLI.
Information
Related
openflow of-instance
Commands
of-instance (Interface)
Add a physical interface or LAG to an OpenFlow instance.
Z-Series, S4810
Syntax
of-instance of-id
Parameter
of-id
Command Modes
INTERFACE MODE
Command History
Version 9.1(0.0)
Example
In the following example, the ports Te 0/7 and Te 0/31 are associated with of-instance 1:
FTOS(conf)#interface tengigabitethernet 0/7
FTOS(conf-if-te-0/7)#of-instance 1
FTOS(conf-if-te-0/7)#interface tengigabitethernet 0/31
FTOS(conf-if-te-0/31)#of-instance 1
FTOS(conf-if-te-0/31)#
Usage
To enable OpenFlow, associate a port or a VLAN to an OF instance. Ports and VLANs must be
Information
associated when the OF instance is created and in a "shut" state (shutdown).
LAGs or port-channel interfaces are supported as of-ports or of-vlan members on OpenFlow.
By default, all ports are available for legacy functionality.
The following features are not supported on physical interfaces associated with an OpenFlow
instance:
•
•
•
•
•
•
•
•
•
•
The following features are not supported on LAGs associated with an OpenFlow instance:
•
32
Create or modify an OpenFlow instance.
Enter the OpenFlow instance ID. Range is 1 to 8.
Introduced on Z9000 and S4810.
Dot1x
Ethernet
GVRP
IPv4
IPv6
MAC
MTU
Port-channel protocols
Spanning-tree protocols
Switchport
Ethernet