Dell Force10 S4820T System Manual de introducción - Página 35
Navegue en línea o descargue pdf Manual de introducción para Interruptor Dell Force10 S4820T System. Dell Force10 S4820T System 39 páginas.
Imprimir página
Configure the Management Route
Define a path from the S4820T to the network from which you are accessing the
S4820T remotely. Management routes are separate from IP routes and are used
to manage the S4820T through the management port.
To configure a management route, follow this step:
Task
Configure a
management route to
the network from
which you are
accessing the system.
Configure the Username and Password
To access the system remotely, configure a system username and password.
To configure a username and password, follow this step:
Task
Configure a username
and password to
access the system
remotely.
Configure the Enable Password
Access EXEC Privilege mode using the enable command. EXEC Privilege
mode is unrestricted by default. As a basic security measure, configure a
password. There are two types of enable passwords:
•
enable password—stores the password in the running/startup configuration
using a data encryption standard (DES)-encryption method.
•
enable secret—stores the running/startup configuration using a stronger,
MD5-encryption method.
Dell Force10 recommends using the enable secret password.
Command Syntax
management route ip-address/mask
gateway
Command Syntax
username username [encryption-type]
password
Performing the Initial Configuration
Command Mode
CONFIGURATION
Command Mode
CONFIGURATION
29