Dell Force10 S4820T System Manuale introduttivo - Pagina 35

Sfoglia online o scarica il pdf Manuale introduttivo per Interruttore Dell Force10 S4820T System. Dell Force10 S4820T System 39.

Configure the Management Route

Define a path from the S4820T to the network from which you are accessing the

S4820T remotely. Management routes are separate from IP routes and are used

to manage the S4820T through the management port.

To configure a management route, follow this step:

Task

Configure a

management route to

the network from

which you are

accessing the system.

To access the system remotely, configure a system username and password.

To configure a username and password, follow this step:

Task

Configure a username

and password to

access the system

remotely.

Access EXEC Privilege mode using the enable command. EXEC Privilege

mode is unrestricted by default. As a basic security measure, configure a

password. There are two types of enable passwords:

•

enable password—stores the password in the running/startup configuration

using a data encryption standard (DES)-encryption method.

•

enable secret—stores the running/startup configuration using a stronger,

MD5-encryption method.

Dell Force10 recommends using the enable secret password.

Command Syntax

management route ip-address/mask

gateway

Command Syntax

username username [encryption-type]

password

Performing the Initial Configuration

Command Mode

CONFIGURATION

Command Mode

CONFIGURATION