Dell N2128PX-ON Actualización de software y firmware - Página 7

Navegue en línea o descargue pdf Actualización de software y firmware para Interruptor Dell N2128PX-ON. Dell N2128PX-ON 14 páginas.
También para Dell N2128PX-ON: Actualización del firmware (14 páginas)

Dell N2128PX-ON Actualización de software y firmware
Upgrade Dell EMC Networking N2128PX-ON Switches

Upgrade Stack of Dell EMC Networking N2128PX-ON Series Switches

Note on "copy" command from steps 2,3 and 4 in switch upgrade above:
"copy" command will take longer to complete with a stack of switches. This is due to the master switch
copying the software to the member switches. The master switch will display the line "Distributing the
code to the members of the stack!" for several minutes until the copy is done.
"copy" command will copy the software to all the switches as "backup" image
console#show version
Machine Description............... Dell Networking Switch
System Model ID................... N2128PX-ON
Machine Type...................... Dell Networking N2128PX-ON
Serial Number..................... 15114M0002LF
Manufacturer...................... 0xbc00
Burned In MAC Address............. 001E.C9E5.BD0F
System Object ID.................. 1.3.6.1.4.1.674.10895.3066
SOC Version....................... BCM56150_A0
HW Version........................ 1
CPLD Version...................... 16
unit active
---- ----------- ----------- -------------- --------------
1
6.3.6.9
2
6.3.6.9
3
6.3.6.9
console# boot system backup
Activating image backup ..
console#show version
Machine Description............... Dell Networking Switch
System Model ID................... N2128PX-ON
Machine Type...................... Dell Networking N2128PX-ON
Serial Number..................... 15114M0002LF
Manufacturer...................... 0xbc00
Burned In MAC Address............. 001E.C9E5.BD0F
System Object ID.................. 1.3.6.1.4.1.674.10895.3066
SOC Version....................... BCM56150_A0
HW Version........................ 1
CPLD Version...................... 16
unit active
---- ----------- ----------- -------------- --------------
1
6.3.6.9
2
6.3.6.9
3
6.3.6.9
console#reload
Management switch has unsaved changes.
Are you sure you want to continue? (y/n) y
Configuration Not Saved!
Are you sure you want to reload the stack? (y/n) y
After the stack of switches has finished rebooting, log in and verify that the firmware has been updated to the
version using the show version command. A single switch will typically reboot in around two minutes. A
6.5.2.15
stack may take significantly longer to complete the upgrade process.
backup
current-active next-active
6.5.2.15
6.3.6.9
6.5.2.15
6.3.6.9
6.5.2.15
6.3.6.9
backup
current-active next-active
6.5.2.15
6.3.6.9
6.5.2.15
6.3.6.9
6.5.2.15
6.3.6.9
6.3.6.9
6.3.6.9
6.3.6.9
6.5.2.15
6.5.2.15
6.5.2.15
Page 5