Dell PowerEdge M520 Manual del usuario - Página 13

Navegue en línea o descargue pdf Manual del usuario para Interruptor Dell PowerEdge M520. Dell PowerEdge M520 26 páginas. Dell poweredge blade servers getting started guide
También para Dell PowerEdge M520: Información actualizada (38 páginas), Notas de publicación (27 páginas), Manual (25 páginas), Manual del usuario (23 páginas), Manual de información importante (35 páginas), Manual de actualización (32 páginas), Manual de actualización (28 páginas), Manual del usuario (22 páginas), Manual de introducción (12 páginas), Manual técnico (46 páginas), Manual técnico (45 páginas), Manual de cartera (27 páginas), Manual de introducción (14 páginas), Manual de introducción (12 páginas)

Imprimir página

Dell 10Gb Ethernet Pass Through II

Command name

show port module

Debug Commands

cr_read

cr_write

3.3

CLI Command Reference Conventions

This section describes the 10GbE PTM CLI commands.

For each command, the following information is provided:

• Synopsis:

Lists the command name and any required or optional parameters. Variable parameters (like port

numbers) are shown in italics. Optional parameters are shown in square brackets, e.g.

[optional_parameter]. Required parameters are shown with no brackets.

• Description:

Provides a detailed description of the command and of all its parameters

• Example:

Usage example and command output.

For purpose of automation, the symbol '#' is used to indicate a comment that extends until the

next new-line character.

3.4

General Commands

3.4.1

help

Synopsis:

help

Description:

Show the list of all available commands.

ADMIN: when in ADMIN mode, this command will also show commands that require

ADMIN privilege level.

Example:

# help

Table 5 - List of Commands

Short Description

Shows uplink module parameters

To read a 32 bit register from device number

device_num.

To write a data DWORD to address

0xHex_address to device number

device_num.

Reference

Section 3.7.2, "show port module," on

page 17

Section 3.8.1, "cr_read (ADMIN)," on

page 17

Section 3.8.2, "cr_write (ADMIN)," on

page 18

Rev 1.00