Dell Z9100-ON Manual de instalación - Página 30
Navegue en línea o descargue pdf Manual de instalación para Interruptor Dell Z9100-ON. Dell Z9100-ON 43 páginas. Open networking
También para Dell Z9100-ON: Manual de instalación (45 páginas), Manual de instalación (45 páginas)
Imprimir página
Management Ports
Besides the 10/25/40/50/100 GbE RJ-45 ports, the Z9100–ON system provides several ports for
management and storage.
Accessing the RS-232 Console Port
The RS-232 console port is on the I/O-side of the Z9100-ON chassis (as shown in the following
illustration).
Figure 15. Z9100–ON RS-232 Console Ports
•
RS-232 Console Port (top)
•
Ethernet management port (bottom)
NOTE: Before starting this procedure, be sure that your PC has a 9-pin serial port and that you have
a terminal emulation program already installed and running on the PC.
NOTE: If your PC's serial port cannot accept a female DB-9 connector, acquire a DB-9 male-to-
male adaptor.
1.
Install the provided RJ-45 connector side of the provided cable into the Z9100-ON console port.
2.
Install the DB-9 female side of the provided copper cable into your PC's serial port (or into other data
terminal equipment [DTE] server hardware that you intend to use).
3.
Keep the default terminal settings on the console as follows:
•
115200 baud rate
•
No parity
•
8 data bits
•
1 stop bit
•
No flow control
30
7
Management Ports