Dell Z9100-ON Manuel d'installation - Page 30
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dell Z9100-ON. Dell Z9100-ON 43 pages. Open networking
Également pour Dell Z9100-ON : Manuel d'installation (45 pages), Manuel d'installation (45 pages)
Imprimer la page
Management Ports
Besides the 10/25/40/50/100 GbE RJ-45 ports, the Z9100–ON system provides several ports for
management and storage.
Accessing the RS-232 Console Port
The RS-232 console port is on the I/O-side of the Z9100-ON chassis (as shown in the following
illustration).
Figure 15. Z9100–ON RS-232 Console Ports
•
RS-232 Console Port (top)
•
Ethernet management port (bottom)
NOTE: Before starting this procedure, be sure that your PC has a 9-pin serial port and that you have
a terminal emulation program already installed and running on the PC.
NOTE: If your PC's serial port cannot accept a female DB-9 connector, acquire a DB-9 male-to-
male adaptor.
1.
Install the provided RJ-45 connector side of the provided cable into the Z9100-ON console port.
2.
Install the DB-9 female side of the provided copper cable into your PC's serial port (or into other data
terminal equipment [DTE] server hardware that you intend to use).
3.
Keep the default terminal settings on the console as follows:
•
115200 baud rate
•
No parity
•
8 data bits
•
1 stop bit
•
No flow control
30
7
Management Ports