AVZ Twins Piazzola Instrucciones de instalación - Página 5

Navegue en línea o descargue pdf Instrucciones de instalación para Accesorios AVZ Twins Piazzola. AVZ Twins Piazzola 20 páginas. Gastro awning

Assembly instructions Twins

Subassembly Piazzola cassette

1. Cut the length material according the cut size table.

2. On the control side, drill a hole of 11 mm in the bottom cover for the motor cable feed. Fit a tulle in

this hole.

3. Around the midpoint of the length drill a hole of 6,5 mm on the drill line in the groove for later

placement of the cover support. Note: No suspension bracket can be placed here.

4. Slide the mounting plate with adjustment socket screws in that same groove. Insert 1 socket screw

through the hole of 6,5 mm and fasten the other one. On both the left and right hand side, slide 2

clamping plates in the groove where the suspension brackets can later be attached. Slide 4 clamping

plates in the groove along the bottom of the profile.

5. Pull the plastic insert strips into the bottom cover.

6. Slide the two splints into the fabric.

Piazzola

Butterfly awning

Twins Piazzola EN 27-08-2018

Page 5