- ページ 5

アクセサリー AVZ Twins PiazzolaのPDF インストール手順をオンラインで閲覧またはダウンロードできます。AVZ Twins Piazzola 20 ページ。 Gastro awning

ページを印刷する
AVZ Twins Piazzola インストール手順
Assembly instructions Twins
Subassembly Piazzola cassette
1. Cut the length material according the cut size table.
2. On the control side, drill a hole of 11 mm in the bottom cover for the motor cable feed. Fit a tulle in
this hole.
3. Around the midpoint of the length drill a hole of 6,5 mm on the drill line in the groove for later
placement of the cover support. Note: No suspension bracket can be placed here.
4. Slide the mounting plate with adjustment socket screws in that same groove. Insert 1 socket screw
through the hole of 6,5 mm and fasten the other one. On both the left and right hand side, slide 2
clamping plates in the groove where the suspension brackets can later be attached. Slide 4 clamping
plates in the groove along the bottom of the profile.
5. Pull the plastic insert strips into the bottom cover.
6. Slide the two splints into the fabric.
Piazzola
Butterfly awning
®
®
Twins Piazzola EN 27-08-2018
Page 5