Award PPS863BS SI Manual de instrucciones - Página 7

Navegue en línea o descargue pdf Manual de instrucciones para Campana de ventilación Award PPS863BS SI. Award PPS863BS SI 12 páginas.

INSTALLATION

BEFORE FITTING THE HOOD TO THE WALL UNIT, PROCEED AS FOLLOWS:

• Open the suction panel by turning the specific knob.

• Disconnect the panel from the hood canopy by sliding the

fixing pin lever.

• Remove grease filters.

• Disconnect the wires to the Commands at the connectors.

• Disconnect the wires to the Light at the connectors.

• Remove the frame by un-

fastening the 6 screws.

• The Hood can be installed directly on the

underside of the wall unit.

• Create an opening in the bottom of the wall

unit, as shown.

• Insert the hood until the side supports snap into

place.

• Fasten using the 10 screws 12a provided.

• Lock in position by tightening the screws Vf

from underneath the hood.

• Screw the Frame back into place using the 6 screws removed as described above, re-connect

the wires to the Commands and Light, replace the metal grease filter and the Panel.

Fitting the Hood canopy