EarthWay 2170 Manual de instrucciones - Página 5
Navegue en línea o descargue pdf Manual de instrucciones para Esparcidor EarthWay 2170. EarthWay 2170 8 páginas. Commercial broadcast spreader with side spread control
También para EarthWay 2170: Manual de instrucciones de montaje y funcionamiento (6 páginas), Manual de instrucciones de montaje y funcionamiento (8 páginas), Manual de instrucciones de montaje (12 páginas), Manual de instrucciones de montaje y funcionamiento (6 páginas), Manual de instrucciones de montaje (10 páginas)
Imprimir página
Earthway Products, Inc. warrants this product free of defects in original workmanship and materials for a period of 5-years
to the end user with the original purchase receipt. If a manufacturing non-conformance is found, Earthway Products, Inc.
at its discretion will repair or replace the part(s) or product at no charge provided the failure is not the result of incorrect
installation, mishandling, misuse, tampering, or normal wear and tear as determined by Earthway. Earthway at its
discretion may require that the part(s) or product be returned along with the original purchase receipt at owners' expense for
examination and compliance with the terms of this warranty. Do not return any product without first receiving authorization
from Earthway Products, Inc. To seek remedy under this warranty, contact Earthway Products, Inc. at 574-848-7491,
[email protected] or write to Earthway Products, Inc. P.O. Box 547 Bristol, Indiana 46507 and describe the nature
of the manufacturing defect. SPECIFIC LIMITATIONS: This warranty covers only the part(s) or product; any labor charges
associated with repair or replacement of non-conformances are specifically excluded. Due to the corrosive nature of most
fertilizers and ice melt products, Earthway Products, Inc. makes no warranty against and specifically excludes part(s) or
product degradation or failure due to corrosion or its effects, or the use of powdered materials. Clean and dry your spreader
thoroughly after each use, as a preventative measure, coat all metal parts with a light oil or silicon spray.
Before filling hopper, become familiar with the operation of this spreader.
5 Obtain proper setting for material to be used from the enclosed SETTING MATRIX included with this spreader, or from
our web site under the MANUALS SECTION.
5 Move stop bolt on rate gauge assembly to the proper setting.
5 While pushing spreader forward, pull control lever back to stop bolt.
5 To stop, push lever forward to close flow holes before you stop moving.
5 When finished, empty any remaining material from hopper.
5 Thoroughly wash spreader and dry before storing. A coating of light oil will help prevent corrosion.
5 If you use Rock Salt, remove agitator when in use to prevent damage to the GEARBOX.
The settings furnished on the Rate Setting Matrix are intended as a guide only. Variations in physical characteristics of
material applied, walking speed, and roughness of ground surface may require slightly different spreader settings. Due to the
above conditions, the manufacturer makes no warranty as to the uniformity of coverage actually obtained from the settings
listed.
NEW ~ NOUVEAU ~ NUEVO
SideSpred-Control
The
affect your application rate, to prevent material from being spread into flowerbeds, on sidewalks, or driveways. The
SideSpred-Control™ maintains the correct application rate while it is activated, giving you excellent results in seeding or
spreading while controlling the spread pattern on the left side of the spreader.
The SideSpred-Control™ is an
SideSpred-Control
The SideSpred-Control™ lever is located under the right side of the hopper. To operate the SideSpred-Control™,
slide the control lever from the front to the back. This will activate the SideSpred-Control™ for a PARTIAL spread
pattern and prevent material from being spread to the left side of the spreader. Position the left wheel of your spreader 4"- 6"
from the sidewalk, flowerbed, or driveway and spread as normal. When you have completed this spreading pass, close the
control lever to "0", and then open the SideSpred-Control™ by sliding the control lever from back to the front, for a FULL
spread pattern.
All spare parts listed herein may be ordered direct from the manufacturer. Be sure to give the following information when
ordering.
; Model Number
; Part Number
; Part Description
You can contact us by calling (574) 848-7491 or 800-294-0671 to place an order with a credit card, or purchase online at
www.earthway.com/parts Questions? Email us at [email protected]
5-YEAR LIMITED WARRANTY
OPERATING INSTRUCTIONS
™ is a new innovation that eliminates the need to use a side deflector, which can adversely
EarthWay
™ OPERATION
HOW TO ORDER SPARE PARTS
exclusive.
PAGE 5