Christie CP2230 Hoja de instrucciones - Página 5

Navegue en línea o descargue pdf Hoja de instrucciones para Bastidores y soportes Christie CP2230. Christie CP2230 9 páginas. Christie rack mount pedestal
También para Christie CP2230: Hoja de instrucciones (6 páginas), Boletín técnico (6 páginas), Boletín técnico (8 páginas), Manual (2 páginas), Manual de instalación y configuración (19 páginas)

CP2000-ZX

ACCESSING THE COOLING SYSTEM

1. Turn the projector lamp OFF. Wait at least 10 minutes to allow for proper cooling to take place.

2. Turn power OFF from the Touch Panel Controller (TPC).

3. Unlock the front lid using the high security key. Raise the lid and slide it out from the opposite side

(Figure 7).

4. Remove the PCM cover by pushing on the tab at the top of the cover. Tilt the cover slightly then

lift enough to clear the tabs at the bottom and remove (Figure 8).

5. Remove the air filter cover by releasing the 2 tabs on the air filter cover, lift and remove

(Figure 8).

Coolant Refill Instruction Sheet

020-100686-01 Rev. 1 (03-2011)

Figure 7 Remove Front Top Lid

Figure 8 Remove PCM and Air Filter Covers

5 of 9