Christie CP2230 Fiche d'instruction - Page 5

Parcourez en ligne ou téléchargez le pdf Fiche d'instruction pour {nom_de_la_catégorie} Christie CP2230. Christie CP2230 9 pages. Christie rack mount pedestal
Également pour Christie CP2230 : Fiche d'instruction (6 pages), Bulletin technique (6 pages), Bulletin technique (8 pages), Manuel (2 pages), Manuel d'installation et de configuration (19 pages)

Imprimer la page
Christie CP2230 Fiche d'instruction
CP2000-ZX
ACCESSING THE COOLING SYSTEM
1. Turn the projector lamp OFF. Wait at least 10 minutes to allow for proper cooling to take place.
2. Turn power OFF from the Touch Panel Controller (TPC).
3. Unlock the front lid using the high security key. Raise the lid and slide it out from the opposite side
(Figure 7).
4. Remove the PCM cover by pushing on the tab at the top of the cover. Tilt the cover slightly then
lift enough to clear the tabs at the bottom and remove (Figure 8).
5. Remove the air filter cover by releasing the 2 tabs on the air filter cover, lift and remove
(Figure 8).
Coolant Refill Instruction Sheet
020-100686-01 Rev. 1 (03-2011)
Figure 7 Remove Front Top Lid
Figure 8 Remove PCM and Air Filter Covers
5 of 9