Miele DA 220-3 Instrucciones de uso e instalación - Página 30

Navegue en línea o descargue pdf Instrucciones de uso e instalación para Campana de ventilación Miele DA 220-3. Miele DA 220-3 32 páginas. Ventilation system
También para Miele DA 220-3: Instrucciones de uso e instalación (36 páginas), Instrucciones de uso e instalación (32 páginas), Instrucciones de uso e instalación (36 páginas)

Air extraction

If the exhaust is ducted into an inactive

flue, the air must be expelled parallel to

the flow direction of the flue.

Never connect an exhaust hood to

an active chimney, dryer vent, vent

flue, or room venting ductwork.

Seek professional advice before

connecting an exhaust hood vent to

an existing, inactive chimney or vent

flue.

Important!

If the ductwork runs through rooms,

ceilings, garages, etc. where

temperature variations exist, it may

need to be insulated to reduce

condensation.

Condensate trap

optional accessory

In some cases, a condensate trap may

also be required to collect and

evaporate any condensate which may

occur. This optional accessory is

available for ducts 5" (125 mm) and

" (150 mm) in diameter.

When installing a condensate trap,

ensure that it is positioned vertically

and if possible directly above the

exhaust outlet. The arrow on the

casing shows the venting direction.