Miele DA 249-3 Instrucciones de uso e instalación - Página 18
Navegue en línea o descargue pdf Instrucciones de uso e instalación para Campana de ventilación Miele DA 249-3. Miele DA 249-3 36 páginas. Ventilation system
También para Miele DA 249-3: Instrucciones de instalación (2 páginas), Manual de dimensiones (2 páginas)
Imprimir página
^ Clean the grease filter
-
use a scrub brush in
warm water with a mild detergent.
-
the lower basket, making sure that
the spray arm is not blocked.
Depending on the detergent,
cleaning the grease filter in a
dishwasher may cause permanent
discoloration of the filter surface.
Performance of the filter will not be
affected by this discoloration.
^ After cleaning, the filter can be
placed on a towel to air dry.
^ For cleaning the decor cover
determine "Cleaning the casing".
^ While the filter is removed, clean any
dirt or grease from the filter casing to
prevent the risk of fire.
^ After returning the grease filter, press
the grease filter button for 3 seconds
to reset the timer.
The indicator light will go out.
^ If the grease filter is cleaned before
the timer has reached its maximum,
the grease filter button should be
pressed for 6 seconds to reset the
counter to zero.
18
place the filter in
^ Angle the grease filter into position
toward the front of the hood.
^ Once the front edge of the filter is in
place, push up the rear of the filter so
that both sides click into place.
^ Hook the decor cover on to the
latches on the rear panel of the
chimney. Push the cover up at the
front so that it clicks in place.