Miele DA 249-3 작동 및 설치 지침 - 페이지 18

{카테고리_이름} Miele DA 249-3에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 249-3 36 페이지. Ventilation system
Miele DA 249-3에 대해서도 마찬가지입니다: 설치 지침 (2 페이지), 치수 매뉴얼 (2 페이지)

페이지 인쇄

^ Clean the grease filter

use a scrub brush in

warm water with a mild detergent.

the lower basket, making sure that

the spray arm is not blocked.

Depending on the detergent,

cleaning the grease filter in a

dishwasher may cause permanent

discoloration of the filter surface.

Performance of the filter will not be

affected by this discoloration.

^ After cleaning, the filter can be

placed on a towel to air dry.

^ For cleaning the decor cover

determine "Cleaning the casing".

^ While the filter is removed, clean any

dirt or grease from the filter casing to

prevent the risk of fire.

^ After returning the grease filter, press

the grease filter button for 3 seconds

to reset the timer.

The indicator light will go out.

^ If the grease filter is cleaned before

the timer has reached its maximum,

the grease filter button should be

pressed for 6 seconds to reset the

counter to zero.

place the filter in

^ Angle the grease filter into position

toward the front of the hood.

^ Once the front edge of the filter is in

place, push up the rear of the filter so

that both sides click into place.

^ Hook the decor cover on to the

latches on the rear panel of the

chimney. Push the cover up at the

front so that it clicks in place.