Miele DDG 102 Manual de instrucciones de instalación - Página 17

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Campana de ventilación Miele DDG 102. Miele DDG 102 28 páginas. External motor roof installation
También para Miele DDG 102: Manual de funcionamiento e instalación (24 páginas), Instrucciones de uso e instalación (28 páginas), Manual de instrucciones de instalación (28 páginas)

ABLG 202

1) Suction side

The ABLG 202 external motor is

designed for installation inside the

house. Possible locations:

– In the attic or ceiling space

– In an adjoining room, e.g. a pantry or

garage

– In the kitchen, if sufficient insulation

is used

It can be installed in a vertical or

horizontal position.

If installing vertically please refer to

the installation instructions on the

next page.

The external motor is connected to the

rangehood by means of a control cable

and is operated by the controls on the

rangehood.

Please refer to the operating and

installation instructions for the

rangehood before installing the

external motor and ducting.

 Position the external motor in a

suitable location.

Pay particular attention to the

direction of the ducting.

 Mark the positions for the four motor

base plate holes on the installation

surface.

 Place the motor to one side.

 Drill four  8 mm holes in the

positions marked to a depth of

40 mm for securing the external

motor.

 Press S8 anchors into the drill holes

so that they are flush.

 Connect the installation mountings

through the fixing holes in the motor

unit base plate.

 Secure the motor with the screws

supplied.

Installation