- ページ 17

換気フード Miele DDG 102のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Miele DDG 102 28 ページ。 External motor roof installation
Miele DDG 102 にも：操作および設置マニュアル (24 ページ), 操作およびインストール手順 (28 ページ), 取付説明書 (28 ページ)

ABLG 202

1) Suction side

The ABLG 202 external motor is

designed for installation inside the

house. Possible locations:

– In the attic or ceiling space

– In an adjoining room, e.g. a pantry or

garage

– In the kitchen, if sufficient insulation

is used

It can be installed in a vertical or

horizontal position.

If installing vertically please refer to

the installation instructions on the

next page.

The external motor is connected to the

rangehood by means of a control cable

and is operated by the controls on the

rangehood.

Please refer to the operating and

installation instructions for the

rangehood before installing the

external motor and ducting.

 Position the external motor in a

suitable location.

Pay particular attention to the

direction of the ducting.

 Mark the positions for the four motor

base plate holes on the installation

surface.

 Place the motor to one side.

 Drill four  8 mm holes in the

positions marked to a depth of

40 mm for securing the external

motor.

 Press S8 anchors into the drill holes

so that they are flush.

 Connect the installation mountings

through the fixing holes in the motor

unit base plate.

 Secure the motor with the screws

supplied.

Installation