HP 226824-001 - ProLiant - ML750 Manual de introducción - Página 9

Navegue en línea o descargue pdf Manual de introducción para Escritorio HP 226824-001 - ProLiant - ML750. HP 226824-001 - ProLiant - ML750 10 páginas. Visualization and acceleration in hp proliant servers
También para HP 226824-001 - ProLiant - ML750: Preguntas frecuentes (4 páginas), Manual de aplicación (35 páginas), Libro Blanco técnico (12 páginas), Actualización del firmware (9 páginas), Visión general (20 páginas), Manual de aplicación (26 páginas), Manual de introducción (22 páginas), Manual de solución de problemas (18 páginas), Manual de aplicación (11 páginas), Manual de instalación (2 páginas), Manual de configuración (2 páginas), Manual de introducción (19 páginas), Manual de actualización (9 páginas), Manual de actualización (16 páginas), Manual de introducción (12 páginas), Resumen tecnológico (9 páginas)

Performance tuning, achieving maximum performance

HP ProLiant servers implement a multi-branch memory architecture to reduce latency and enhance

performance. This architecture allows the memory controller to fetch data in parallel from the different

channels through memory interleaving. The latency for two channels is almost 40 percent lower than

that of a single channel. The difference in latency between two channels and four channels is not as

significant.

Figure 7 shows a dual-branch memory subsystem architecture using FB-DIMMs. To achieve maximum

performance, all FB-DIMMs should be installed in matching sockets across each paired channel. For

example, the FB-DIMM in slot 1A must be the same type (size and rank) as the FB-DIMM in slot 3A.

Likewise, the FB-DIMMs in slots 2B and 4B must be the same type. While single- and dual-rank FB-

DIMMs can be installed in a specific server, single-rank and dual-rank FB-DIMMs should not be mixed

in matching dual-channel sockets.

Figure 7. FB-DIMM population rules

General performance tuning tips include the use of dual-rank DIMMs and balanced channels. Use

dual-rank DIMMs instead of single-rank DIMMs if possible. For example, using eight 1-GB DIMMs

instead of sixteen 512MB DIMMs will improve performance. This has the added benefit of using less

power per GB of memory. Also, when configuring memory, keep the channels balanced to minimize

the latency per channel—latency increases with each additional set of FB-DIMMs.

HP supports the FB-DIMM standard because it increases reliability, bandwidth, and capacity while

using cost optimized, industry-standard DRAM components. The balanced system architecture of

ProLiant servers with dual-core processors and FB-DIMMs delivers increased memory capacity and

bandwidth. FBDIMM technology also delivers improved reliability through better data protection and

data availability.

HP will continue to evaluate relevant memory technologies in order to offer customers products with

the most reliable, best performing memory at the lowest possible cost.