HP 8100 - Elite Convertible Minitower PC Manual de instalación y configuración - Página 16

Navegue en línea o descargue pdf Manual de instalación y configuración para Escritorio HP 8100 - Elite Convertible Minitower PC. HP 8100 - Elite Convertible Minitower PC 48 páginas. Hp compaq convertible minitower business pc
También para HP 8100 - Elite Convertible Minitower PC: Especificaciones (2 páginas), Manual de inicio y configuración rápida (21 páginas), Lista de apoyo (34 páginas), Manual de configuración del software (9 páginas), Mapa ilustrado de piezas y servicios (4 páginas)

Note: The ME On in Host Sleep State mode will automatically set to

Desktop: ON in S0, ME Wake in S3, S4-5 after Activating the

Network Access (step 9).

b. Idle Timeout

Default Setting

Recommended Setting

This option sets the timeout value for Wake-On-ME.

The default timeout value is 65535 from the factory and it is in units of

a minute. A value of 0 means the Wake-On-ME feature is disabled

and the ME will not go to sleep when not being used in a non-active

system. HP recommends a setting of 65535 for most applications.

Certain console vendor's product falsely detect an AMT system as

disconnected if the software has to wait for the ME to wake and

respond. If the console software being used does not have this issue,

HP recommends a setting of 1 which allows the ME to go to sleep after

approximately 1 minute of inactivity. This allows for maximum power

savings when the ME is enabled to be on in S3, S4, or S5.

The timeout value can be set in decimal and hexadecimal notation. It

must be set to a non-zero value for the ME to take advantage of Wake-

On-ME.

This value is not used when the system is in an active state – S0.

This value is used only if the ME ON in Host Sleep State setting is set

to allow ME WoL.

See Appendix C for an explanation of Wake-On-ME / ME WoL.

13.

Return to MEBx Main menu.

Select Previous menu and press Enter to go back to the MEBx Main menu.

: 65535