HP 8100 - Elite Convertible Minitower PC 설정 및 구성 매뉴얼 - 페이지 16
{카테고리_이름} HP 8100 - Elite Convertible Minitower PC에 대한 설정 및 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 8100 - Elite Convertible Minitower PC 48 페이지. Hp compaq convertible minitower business pc
HP 8100 - Elite Convertible Minitower PC에 대해서도 마찬가지입니다: 사양 (2 페이지), 빠른 설정 및 시작하기 매뉴얼 (21 페이지), 지원 목록 (34 페이지), 소프트웨어 구성 매뉴얼 (9 페이지), 그림 부품 및 서비스 지도 (4 페이지)
페이지 인쇄
Note: The ME On in Host Sleep State mode will automatically set to
Desktop: ON in S0, ME Wake in S3, S4-5 after Activating the
Network Access (step 9).
b. Idle Timeout
Default Setting
Recommended Setting
This option sets the timeout value for Wake-On-ME.
The default timeout value is 65535 from the factory and it is in units of
a minute. A value of 0 means the Wake-On-ME feature is disabled
and the ME will not go to sleep when not being used in a non-active
system. HP recommends a setting of 65535 for most applications.
Certain console vendor's product falsely detect an AMT system as
disconnected if the software has to wait for the ME to wake and
respond. If the console software being used does not have this issue,
HP recommends a setting of 1 which allows the ME to go to sleep after
approximately 1 minute of inactivity. This allows for maximum power
savings when the ME is enabled to be on in S3, S4, or S5.
The timeout value can be set in decimal and hexadecimal notation. It
must be set to a non-zero value for the ME to take advantage of Wake-
On-ME.
This value is not used when the system is in an active state – S0.
This value is used only if the ME ON in Host Sleep State setting is set
to allow ME WoL.
See Appendix C for an explanation of Wake-On-ME / ME WoL.
13.
Return to MEBx Main menu.
Select Previous menu and press Enter to go back to the MEBx Main menu.
: 65535
: 65535
16