Miele CS 1122 Instrucciones de uso e instalación - Página 28

Navegue en línea o descargue pdf Instrucciones de uso e instalación para Placa de cocción Miele CS 1122. Miele CS 1122 48 páginas. Ceramic combiset
También para Miele CS 1122: Instrucciones de uso e instalación (40 páginas), Manual de funcionamiento e instalación (40 páginas), Instrucciones de uso e instalación (40 páginas), Instrucciones de uso e instalación (40 páginas), Manual del usuario (45 páginas), Instrucciones de uso e instalación (40 páginas)

Miele CS 1122 Instrucciones de uso e instalación

Safety instructions for installation

General
Fit wall units and extractor hood
before fitting the hob to avoid
damaging the surface.
~
The veneer or laminate coatings of
worktops (or adjacent kitchen units)
must be treated with 100 °C
heat-resistant adhesive which will not
dissolve or distort.
Any backmoulds must be of
heat-resistant material.
~
This equipment is not designed for
maritime use or for use in mobile
installations such as caravans, aircraft
etc. However it may be suitable for
such usage subject to a risk
assessment of the installation being
carried out by a suitably qualified
engineer.
~
The hob may only be built in over a
Miele oven if the worktop is at least 40
mm thick.
28
~
After the hob has been installed,
ensure that the connection cable is
without hindrance and that there is no
mechanical obstruction which could
damage it, such as a drawer.
~
These appliances must not be
installed over a dishwasher, washing
machine, tumble dryer, refrigerator or
freezer. The high temperatures radiated
by hobs could damage the appliance
below.
~
Spray canisters, aerosols and other
inflammable substances should not be
stored in a drawer under the hob.
Cutlery inserts must be heat-resistant.
All dimensions in this instruction booklet
are given in mm.