Miele CS 1122 Operating And Installation Instructions - Page 28

Browse online or download pdf Operating And Installation Instructions for Cooktop Miele CS 1122. Miele CS 1122 48 pages. Ceramic combiset
Also for Miele CS 1122: Operating And Installation Instructions (40 pages), Operating And Installation Manual (40 pages), Operating And Installation Instructions (40 pages), Operating And Installation Instructions (40 pages), User Manual (45 pages), Operating And Installation Instructions (40 pages)

Print Page
Miele CS 1122 Operating And Installation Instructions

Safety instructions for installation

General
Fit wall units and extractor hood
before fitting the hob to avoid
damaging the surface.
~
The veneer or laminate coatings of
worktops (or adjacent kitchen units)
must be treated with 100 °C
heat-resistant adhesive which will not
dissolve or distort.
Any backmoulds must be of
heat-resistant material.
~
This equipment is not designed for
maritime use or for use in mobile
installations such as caravans, aircraft
etc. However it may be suitable for
such usage subject to a risk
assessment of the installation being
carried out by a suitably qualified
engineer.
~
The hob may only be built in over a
Miele oven if the worktop is at least 40
mm thick.
28
~
After the hob has been installed,
ensure that the connection cable is
without hindrance and that there is no
mechanical obstruction which could
damage it, such as a drawer.
~
These appliances must not be
installed over a dishwasher, washing
machine, tumble dryer, refrigerator or
freezer. The high temperatures radiated
by hobs could damage the appliance
below.
~
Spray canisters, aerosols and other
inflammable substances should not be
stored in a drawer under the hob.
Cutlery inserts must be heat-resistant.
All dimensions in this instruction booklet
are given in mm.