Bürkert 0400 Manual de instrucciones - Página 7

Navegue en línea o descargue pdf Manual de instrucciones para Unidad de control Bürkert 0400. Bürkert 0400 12 páginas.

insTallaTiOn

5.1 safety instructions

Danger!

Risk of injury from high pressure in the equipment.

▶ Before loosening the pipes and valves, turn off the pressure and

vent the lines.

Risk of injury due to electrical shock.

▶ Before reaching into the device or the equipment, switch off the power

supply and secure to prevent reactivation.

▶ Observe applicable accident prevention and safety regulations for

electrical equipment.

Warning!

Risk of injury from improper installation.

▶ Installation may be carried out by authorized technicians only and

with the appropriate tools.

▶ Secure system from unintentional activation.

▶ Following assembly, ensure a controlled restart.

5.2 Before installation

Installation position: any, coil preferably upwards.

→

Check pipelines for dirt and clean.

→

Install a dirt filter before the valve inlet (≤ 500 µm).

note!

Caution risk of breakage!

• Do not use the coil as a lever arm.

→

Seal thread.

→

Hold the device with a open-end wrench on the valve body and

screw into the pipeline.

Valve body must not be installed under tension.

Sealing material must not get into the device.

→

Observe direction of flow:

The arrow on the body indicates the direction of flow.

english