Dialog DA16200 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Hardware informático Dialog DA16200. Dialog DA16200 20 páginas. At gui tool

Imprimir página

DA16200 AT GUI Tool

Introduction

This section introduces the subject or problem described in this

(DA16200_GUI_yyyymmdd.exe) lets users control DA16200 EVK in GUI environment. It provides

two modes of operation: Certification mode and Network mode

1.1

Certification mode

This mode is for Wi-Fi RF test (Tx power, Rx sensitivity, etc.) aka "TEST Mode".

1.2

Network mode

With this mode, you can test Station or AP mode of DA16200

●

AP mode

SoftAP test with configurable parameters like SSID, security, DHCP Server, etc.

●

Station mode

STA test; search and connect to an Access Point & check / test STA function.

How to Connect

2.1

USB to Serial Driver

The DA16200 evaluation board supports both serial port (UART) and USB port (default USB). The

user just needs to connect with a micro USB cable and then two COM ports will be detected

automatically.

●

If USB port is used, install the FT232 Driver for windows

●

In most cases, it will be installed automatically

The FTDI driver for the FT2232 FTDI chip used on the Pro-DK motherboard can be found at

following download link:

After connecting the PC and the EVB board, two ports will be detected.

●

Please see your EVK User Guide to find the UART1 port. GUI tool is using UART1 port.

The other port (UART0) is for debug console connection. This port is used for firmware update.

●

If you want to update with a new DA16200 firmware, please refer to "DA16200 EVK User Guide".

RF certification program was developed by MFC. Therefore, this program may need to install the

MFC library package.

●

You can download the Visual Studio Redistributable file in Microsoft soft home page

https://www.microsoft.com/en-us/download/details.aspx?id=48145

●

Select windows OS type (32bit or 64bit) and download & install.

User Manual

CFR0012

http://www.ftdichip.com/Drivers/CDM/CDM21224_Setup.zip

Revision 1.0 DRAFT

5 of 20

document.

The DA16200 GUI tool

03-Jul-2019