Dialog DA16200 사용자 설명서 - 페이지 5
{카테고리_이름} Dialog DA16200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dialog DA16200 20 페이지. At gui tool
DA16200 AT GUI Tool
1
Introduction
This section introduces the subject or problem described in this
(DA16200_GUI_yyyymmdd.exe) lets users control DA16200 EVK in GUI environment. It provides
two modes of operation: Certification mode and Network mode
1.1
Certification mode
This mode is for Wi-Fi RF test (Tx power, Rx sensitivity, etc.) aka "TEST Mode".
1.2
Network mode
With this mode, you can test Station or AP mode of DA16200
●
AP mode
SoftAP test with configurable parameters like SSID, security, DHCP Server, etc.
●
Station mode
STA test; search and connect to an Access Point & check / test STA function.
2
How to Connect
2.1
USB to Serial Driver
The DA16200 evaluation board supports both serial port (UART) and USB port (default USB). The
user just needs to connect with a micro USB cable and then two COM ports will be detected
automatically.
●
If USB port is used, install the FT232 Driver for windows
●
In most cases, it will be installed automatically
The FTDI driver for the FT2232 FTDI chip used on the Pro-DK motherboard can be found at
following download link:
After connecting the PC and the EVB board, two ports will be detected.
●
Please see your EVK User Guide to find the UART1 port. GUI tool is using UART1 port.
The other port (UART0) is for debug console connection. This port is used for firmware update.
●
If you want to update with a new DA16200 firmware, please refer to "DA16200 EVK User Guide".
RF certification program was developed by MFC. Therefore, this program may need to install the
MFC library package.
●
You can download the Visual Studio Redistributable file in Microsoft soft home page
https://www.microsoft.com/en-us/download/details.aspx?id=48145
●
Select windows OS type (32bit or 64bit) and download & install.
User Manual
CFR0012
http://www.ftdichip.com/Drivers/CDM/CDM21224_Setup.zip
Revision 1.0 DRAFT
5 of 20
document.
The DA16200 GUI tool
© 2020 Dialog Semiconductor
03-Jul-2019