ALLOWANCE 100 Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Controlador ALLOWANCE 100. ALLOWANCE 100 15 páginas. Television time manager

0215 ENTER

Note: If you press CLEAR before you press ENTER and after you have entered some number or numbers then

the display flashes "A1" and you can begin to enter the hours and minutes of the weekly time allowance again.

4.3. FORCE KEY – CHANGE TIME REMAINING IN AN ALLOWANCE

To change the time remaining in a weekly time allowance press the FORCE key and one of the digits 1, 2, 3, or

4 corresponding to which child's time account is being changed. The display will blink "Fn" where n is a

number from 1 to 4, and the LED corresponding to that child will light up. You then enter the hours and minutes

of the time remaining in the time allowance and press the ENTER key. Please note that any changes made using

the FORCE key will change only the time remaining in the child's account and not the weekly time allowance.

The maximum amount of time that can be set as the time remaining in a Weekly Time Allowance is 99 hours

and 99 minutes.

If you make a mistake or wish to change the digits entered then keep pressing digits until the display shows the

access code you want to use and then press the ENTER key.

You may also press the CLEAR key to abort the entering of the hours and minutes, if you do this after you have

started entering numbers then the display flashes "Fn" and you are placed back into PARENT MODE.

For example if child one is to have 1 hours and 45 minutes of time left in his time allowance you would press

the following keys.

Key(s) Pressed

FORCE 1

0145 ENTER

4.4. LOOK KEY – LOOK AT ALLOWANCE, TIME REMAINING, & ACCESS CODE

While in Parent Mode, to view Weekly Time Allowances, Time Remaining in those allowances and Access

Codes for the allowances press LOOK key. The display will blink "L". This will cause the display to cycle

through the time allowance, time remaining in the allowance, and the access code for the child that corresponds

to the number entered. If you press ENTER or CLEAR instead of a number from 1 to 4 then the look function

exits and you are back in PARENT MODE.

As an example if you wanted to view child one's allowance, time remaining and access code you would press

the following keys (assume that the allowance for child one is 2 hours and 15 minutes, the time remaining in his

Note: If you press CLEAR or ENTER then the code function aborts

and you are back in parent mode.

2 hours and 15 minutes is set for child one's weekly time

allowance, the TV Allowance beeps and LED 1 goes out. The

Parent Light remains on.

Action Taken

The display blinks "F1", the TV Allowance beeps, and LED lights

up.

Note: If you press CLEAR or ENTER then the force function

aborts and you are back in parent mode.

1 hour and 45 minutes is set as the time remaining in child one's

weekly time allowance; press enter and the TV Allowance beeps.

The Parent light will remain on.

Note: If you press CLEAR before you press ENTER (after you

have entered some numbers) then the display flashes "F1" and you

can start over.