Alloy ESM-24T02M Manual de instalación rápida - Página 5
Navegue en línea o descargue pdf Manual de instalación rápida para Interruptor Alloy ESM-24T02M. Alloy ESM-24T02M 5 páginas. Etherguard managed switch
Imprimir páginaHow to Modify Switch's IP address via Out-of-Band method
1. Login to the console (note: default User Name: admin, Password: admin).
2. Use "Tab" key to select (highlight) "Switch Static Configuration" and hit "Enter".
3. Use "Tab" key to select "Administration Configuration" and hit "Enter".
4. Use "Tab" key to select "IP Configuration" and hit "Enter".
5. Use "Tab" key to select "Edit" and hit "Enter".
6. Use "Tab" key to highlight "IP Address", enter the desired IP address (e.g.
192.168.0.100), and hit "Enter".
7. The "Subnet Mask" is now highlighted, enter the correct subnet mask, and hit "Enter".
8. Input the Gateway address and hit "Enter".
9. Press and hold "Ctrl" and then hit "A" to go to the "Action Menu".
10. Use "Tab" key to select "Save" and hit "Enter".
11. The screen will prompt you to "restart the system...", turn off the Switch, wait for 10
seconds, and then turn the Switch's power back on.
After the Switch finishes the self-diagnostic, open your computer's web browser and at the
"Address:" field, enter the Switch's IP address (e.g. http://192.168.0.100), hit "Enter" or click
on "Go", and the Switch's login page will prompt you to enter "User Name" and Password"
to login.
(Note: default User Name: admin, Password: admin).
How To Modify Your Network Adapter's IP address
You can change the network adapter's IP address in the Network Adapter's "Properties". We
suggest that you change the network adapter's IP to the following settings:
IP Address: 192.168.0.101
Subnet Mask: 255.255.255.0
(Note: you don't need to enter a Gateway address at this time.)
Reboot your computer if necessary. After the computer restarts, open your web browser and at
the "Address" field, enter http://192.168.0.100 , hit "Enter" or click on "Go", and the
Switch's login page will prompt you to enter "User Name" and Password" to login.
(Note: default User Name: admin, Password: admin).
For the complete configuration guide, please refer to the User's Guide on the CD-ROM.
5 of 5