Alloy LED AL-60-03-0008 Especificaciones - Página 7
Navegue en línea o descargue pdf Especificaciones para Controlador Alloy LED AL-60-03-0008. Alloy LED AL-60-03-0008 7 páginas. Led wifi controller hub
Imprimir página
P18
.
RGB/White Brightness Slider (P21)
This button can be used in the RGB and CDW color wheels: the following shows
c. pause&run button(P19)
Running button exist in RGB, CDW color wheel interface, they
RGB as an example.
are similar so here will take RGB as an example to explain.
Attention
1. Short press the "W" button.
2. Brightness level can be adjusted from 0-255 to an accurate color.
Note: Before adjusting the color using the color sliders, the LEDs may already
be displaying an existing color, so you will need to clear each channel first: move
the slider in each channel to any level, then move it back to zero. The RGB light-
ing will then turn off, which means the channels have been cleared successfully.
e. RGB/CDW brightness level line(P21)
P18
P19
This button exist in RGB/CDW interface, they are similar, so
P18
here will take RGB as an example to explain.
1)Short press the button
18)
W (White) Button (P22)
2)Brightness level can be adjusted
c. pause&run button(P19)
from 0-255 to an accurate color.
c. pause&run button(P19)
This button only exists in the RGB-W/RGB color wheel, when using RGB-W
Running button exist in RGB, CDW color wheel interface, they
Running & Pause button
Running button exist in RGB, CDW color wheel interface, they
Attention
are similar so here will take RGB as an example to explain.
tape light, to adjust the White channel brightness. Long press the W button
are similar so here will take RGB as an example to explain.
Before adjust the color by color line, LED might in already in
turn the White channel on or off independently. You must use the W button to
an existing color, so we need zero clearing each channel first:
Attention
Attention
Fastest speed
moving each channel in any level between 1-225, then move it
adjust the brightness of the W channel independently.
back to zero, then RGB lighting will off which means zero
clearing successfully.
Moving speed
f. W button(P22)
adjust libe
This button only exists in RGB channels color wheel interface to
adjust W channel brightness independently.
Lowest speed
Long press W button
In RGB color wheel interface,it only adjusts R,G and B three channels
brightness,and cannot adjusts W channel.We need use W button
P19
to adjust W channel brightness independently.
g. Brightness button(P23)
e. RGB/CDW brightness level line(P21)
e. RGB/CDW brightness level line(P21)
Brightness Button (P23)
This button exist in RGB/CDW interface, they are similar, so
Brightness button exist in RGB, CDW and CCT color wheel
This button exist in RGB/CDW interface, they are similar, so
here will take RGB as an example to explain.
interface.
here will take RGB as an example to explain.
The Brightness button exists in the RGB-W/RGB, CDW and CCT color
1)Short press the button
In CDW and CCT color wheel interface, it adjusts all channels
1)Short press the button
wheels. It adjusts the brightness of all channels.
brightness.
2)Brightness level can be adjusted
2)Brightness level can be adjusted
from 0-255 to an accurate color.
from 0-255 to an accurate color.
Attention
Attention
Before adjust the color by color line, LED might in already in
Before adjust the color by color line, LED might in already in
an existing color, so we need zero clearing each channel first:
an existing color, so we need zero clearing each channel first:
moving each channel in any level between 1-225, then move it
moving each channel in any level between 1-225, then move it
back to zero, then RGB lighting will off which means zero
back to zero, then RGB lighting will off which means zero
clearing successfully.
clearing successfully.
f. W button(P22)
f. W button(P22)
This button only exists in RGB channels color wheel interface to
This button only exists in RGB channels color wheel interface to
Save/Recall Button (P24)
adjust W channel brightness independently.
adjust W channel brightness independently.
Long press W button
to ON/OFF W channel independently.
Save
Long press W button
In RGB color wheel interface,it only adjusts R,G and B three channels
In RGB color wheel interface,it only adjusts R,G and B three channels
1. Select a room/zone.
brightness,and cannot adjusts W channel.We need use W button
brightness,and cannot adjusts W channel.We need use W button
to adjust W channel brightness independently.
to adjust W channel brightness independently.
2. Select a color or a color-changing mode.
g. Brightness button(P23)
g. Brightness button(P23)
3. Short press the Save button.
Brightness button exist in RGB, CDW and CCT color wheel
Brightness button exist in RGB, CDW and CCT color wheel
interface.
4. Long press one of the buttons from S1 to S8.
interface.
In CDW and CCT color wheel interface, it adjusts all channels
In CDW and CCT color wheel interface, it adjusts all channels
5. The LED lighting will flash to indicate the setting has been
brightness.
brightness.
saved successfully.
Recall
1. Select a room/zone.
2. Short press the Save button.
3. Short press one of the buttons from S1 to S8.
to ON/OFF W channel independently.
4. The LED lighting will display the saved setting.
www.AlloyLED.com
page 7 of 7
®
Specifications
®
P19
18)
Running & Pause button
Fastest speed
Moving speed
adjust libe
Lowest speed
P19
d. music(P20)
18)
The highest,a low voice
will affect the moving
speed lowest
to ON/OFF W channel independently.
to ON/OFF W channel independently.
|
Call: 800.910.LEDS [5337]
Specifications subject to change without notice.
choose successfully, multiple rooms can be choose at same time
Press room button again be confirm the rooms' selection
4
Lowest speed
Upper area will indicate room's name we selected.
5
b. color wheel
There will be four different color wheels we can select if we did
not edit the room: RGB, CDW, CCT, Single color.
1)Slide the upper areas from top to down to choose color wheel
d. music(P20)
from one to one. (P16,P17)
Running & Pause button
Fastest speed
Moving speed
The highest,a low voice
adjust libe
will affect the moving
speed lowest
Lowest speed
P15
P20
h. Save button(P24)
P21
P22
1.Save
1)Select rooms/zones
2)Select color or moving modes
3)Short press save button
4)Long press any button of S1-S8
5)LED lighting will flash indicate save successfully.
100% brightness
2.Recall
1)Select rooms/zones
2)Short press save button
3)short press saved button in S1-S8
4)LED will indicate saved color or moving modes
1% brightness
P23
h. Save button(P24)
1.Save
1)Select rooms/zones
2)Select color or moving modes
3)Short press save button
4)Long press any button of S1-S8
|
Text: 510.400.6690
5)LED lighting will flash indicate save successfully.
2.Recall
1)Select rooms/zones
will affect the moving
speed lowest
P29
P15
P16
P15
d. music(P20)
The highest,a low voice
will affect the moving
speed lowest
P21
P20
P16
P17
W
When choose
,it will
open your local music
palyer
P23
h. Save button(P24)
The lowest,need a high
1.Save
voice affect moving speed.
1)Select rooms/zones
2)Select color or moving modes
P21
P22
P21
3)Short press save button
4)Long press any button of S1-S8
5)LED lighting will flash indicate save successfully.
2.Recall
1)Select rooms/zones
100% brightness
2)Short press save button
100% brightness
3)short press saved button in S1-S8
4)LED will indicate saved color or moving modes
W channel's
brightness level
1% brightness
1% brightness
P23
P23
h. Save button(P24)
1.Save
1)Select rooms/zones
2)Select color or moving modes
3)Short press save button
4)Long press any button of S1-S8
5)LED lighting will flash indicate save successfully.
2.Recall
1)Select rooms/zones
2)Short press save button
3)short press saved button in S1-S8
4)LED will indicate saved color or moving modes
P24
|
The lowes
voice affec
P20
P17
P16
100%
W cha
brightn
1% bri
When choose
,it will
When choo
open your local music
open your l
palyer
palyer
The lowest,need a high
P22
The lowest
voice affect moving speed.
voice affec
P20
100% brightness
100% brightness
100% b
1% brightness
W channel's
W chan
brightness level
brightn
1% brightness
1% brig
P
P22
100% brightness
1% brightness
P24
P
v3