ALLpaQ Packaging Group Genesis 250 C Manual del operador - Página 13

Navegue en línea o descargue pdf Manual del operador para Equipos de envasado ALLpaQ Packaging Group Genesis 250 C. ALLpaQ Packaging Group Genesis 250 C 13 páginas.

Imprimir página

ALLpaQ Packaging Group Genesis 250 C Manual del operador

3.10 Removal of bag

Fig 10.1

Once removed the base access door should be closed (Fig 10.2)

Once removed the bag should be disposed of in line with company policy.

3.11 Folding Container

Hold either of the two short sided panels and ﬁrmly push towards the centre of the unit. (Fig 11.1)

Allow the panel to rest on the base inside the unit and repeat the action for the opposite short side

panel. (Fig 11.2)

The remaining long side panels may be folded in sequence and the lid ﬁtted to the folded container

Ensure the yellow catches are in open position to ﬁt the lid, then locked inwards on completion.

3.12 Moving the container to storage

Pallet base allows for four way entry and two entry dependent upon manual handling equipment.

For detailed information please refer to instruction at (See 3.1).

Any sampling should be conducted according to bag suppliers

recommendations.

Bag can be drained.

Fig 9.2

Fig 11.2

First fold steel frame then rest in the base and replace the

Fig 11.1

padded ﬂoor by reversing the procedure at 3.2 (Fig 2.7)

Manual V1 - (Sept 14

Once the bag is drained

apply any clamps to the

outlet tubing (Fig 10.1).

The bag can now be pulled

out of the top of the

container.

Fig 10.2

Fig 11.3

2012)

Fig 11.4