ALLpaQ Packaging Group Genesis 250 C Manuale d'uso dell'operatore - Pagina 13

Sfoglia online o scarica il pdf Manuale d'uso dell'operatore per Attrezzature per l'imballaggio ALLpaQ Packaging Group Genesis 250 C. ALLpaQ Packaging Group Genesis 250 C 13.

ALLpaQ Packaging Group Genesis 250 C Manuale d'uso dell'operatore
3.10 Removal of bag
Fig 10.1
Once removed the base access door should be closed (Fig 10.2)
Once removed the bag should be disposed of in line with company policy.
3.11 Folding Container
Hold either of the two short sided panels and firmly push towards the centre of the unit. (Fig 11.1)
Allow the panel to rest on the base inside the unit and repeat the action for the opposite short side
panel. (Fig 11.2)
The remaining long side panels may be folded in sequence and the lid fitted to the folded container
Ensure the yellow catches are in open position to fit the lid, then locked inwards on completion.
3.12 Moving the container to storage
Pallet base allows for four way entry and two entry dependent upon manual handling equipment.
For detailed information please refer to instruction at (See 3.1).
Any sampling should be conducted according to bag suppliers
recommendations.
Bag can be drained.
Fig 9.2
Fig 11.2
First fold steel frame then rest in the base and replace the
Fig 11.1
padded floor by reversing the procedure at 3.2 (Fig 2.7)
Manual V1 - (Sept 14
Once the bag is drained
apply any clamps to the
outlet tubing (Fig 10.1).
The bag can now be pulled
out of the top of the
container.
Fig 10.2
Fig 11.3
th
2012)
Fig 11.4