Miller ArcReach 16 Manual del usuario - Página 32

Navegue en línea o descargue pdf Manual del usuario para Sistema de soldadura Miller ArcReach 16. Miller ArcReach 16 48 páginas.

�

Complete Parts List is available at www.MillerWelds.com

DIP Switch Settings

Display Feeder Information - Set switch 5 so the depressed section is toward OPEN as labeled on the switch.

With switch in ON position, at feeder power up, feeder will display various sets of information. Each set of information

will be displayed for three seconds.

Display Board (PC22) Software Part Number -Top display will show the first three digits, bottom display will show

last three digits of the Display board (PC22) software revision level.

Motor Board (PC1) Software Part Number -Top display will show the first three digits, bottom display will show last

three digits of the Motor board (PC1) software revision level.

Accumulated Weld Time -This is the time the feeder has actually been used for welding. This information will be dis-

played in two halves. First half being years (top display) and days (bottom display), second half is hours (top display)

and minutes (bottom display).

Do Not Display Feeder Information (Factory Default) - Set switch 5 so the depressed section is toward 5 as labeled

on the switch.

Feeder information is not displayed.

OM-278792 Page 26