Miller ArcReach 16 Manual del usuario - Página 30

Navegue en línea o descargue pdf Manual del usuario para Sistema de soldadura Miller ArcReach 16. Miller ArcReach 16 48 páginas.

5-13. Meter Board (PC22) DIP Switch Settings

Ref. 278794-A

OM-278792 Page 24

�

Complete Parts List is available at www.MillerWelds.com

1 Factory default DIP switch settings to dis-

play wire speed as inches per minute

2 Factory default DIP switch settings to dis-

play wire speed as meters per minute

Accessing DIP Switch

3 Lens

DIP switch is located under the lens next to

the displays.

4 Lens Screws

Remove three screws.

Loosen upper right hand screw to rotate lens

enough to access DIP switch.

Replace three screws removed earlier.

Tighten upper right hand screw.

�

The two upper screws must engage the

backing plate to properly secure the

front panel.