- ページ 30

溶接システム Miller ArcReach 16のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Miller ArcReach 16 48 ページ。

ページを印刷する
Miller ArcReach 16 オーナーズマニュアル

5-13. Meter Board (PC22) DIP Switch Settings

1
Ref. 278794-A
OM-278792 Page 24
�
Complete Parts List is available at www.MillerWelds.com
2
4
3
1 Factory default DIP switch settings to dis-
play wire speed as inches per minute
2 Factory default DIP switch settings to dis-
play wire speed as meters per minute
Accessing DIP Switch
3 Lens
DIP switch is located under the lens next to
the displays.
4 Lens Screws
Remove three screws.
Loosen upper right hand screw to rotate lens
enough to access DIP switch.
Replace three screws removed earlier.
Tighten upper right hand screw.
�
The two upper screws must engage the
backing plate to properly secure the
front panel.