Miller XT30 Manual del usuario - Página 33
Navegue en línea o descargue pdf Manual del usuario para Sistema de soldadura Miller XT30. Miller XT30 44 páginas. Air plasma cutting and gouging
También para Miller XT30: Manual del usuario (40 páginas)
Imprimir página
7-5.
Checking Or Replacing Filter Element
1-1. Checking Or Replacing Filter Element
tools/
philips head
Significant DC voltage can remain
on capacitors after unit is Off. Check
to see that front panel lights (LEDs)
have stopped flashing and are off
before removing wrapper.
Turn power Off, and disconnect input power
plug from receptacle. Remove wrapper from
unit (see Section 7-3).
1 Filter Base
steelbrush
nutdriver
light-duty workclamp
greasegun
handream
awl
�
Complete Parts List is available at www.MillerWelds.com
A complete Parts List is available at www.MillerWelds.com
Torx 25
wrench
crescent wrench
2 Filter
3 Filter Cup
Unscrew filter cup from base.
Remove cup.
Unscrew filter element from base.
chippinghammer
wirecutter
frontcutter
filterwrench
file
paintbrush
1
2
3
Ref. 251808-A / Ref. 804506-B
Check filter element for dirt and moisture,
and replace element if necessary.
Be sure that all parts are clean and dry.
Reinstall filter element, and secure filter cup.
Reinstall wrapper.
OM-253555 Page 29