Miller XT30 소유자 매뉴얼 - 페이지 33
{카테고리_이름} Miller XT30에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller XT30 44 페이지. Air plasma cutting and gouging
Miller XT30에 대해서도 마찬가지입니다: 소유자 매뉴얼 (40 페이지)
페이지 인쇄
7-5.
Checking Or Replacing Filter Element
1-1. Checking Or Replacing Filter Element
tools/
philips head
Significant DC voltage can remain
on capacitors after unit is Off. Check
to see that front panel lights (LEDs)
have stopped flashing and are off
before removing wrapper.
Turn power Off, and disconnect input power
plug from receptacle. Remove wrapper from
unit (see Section 7-3).
1 Filter Base
steelbrush
nutdriver
light-duty workclamp
greasegun
handream
awl
�
Complete Parts List is available at www.MillerWelds.com
A complete Parts List is available at www.MillerWelds.com
Torx 25
wrench
crescent wrench
2 Filter
3 Filter Cup
Unscrew filter cup from base.
Remove cup.
Unscrew filter element from base.
chippinghammer
wirecutter
frontcutter
filterwrench
file
paintbrush
1
2
3
Ref. 251808-A / Ref. 804506-B
Check filter element for dirt and moisture,
and replace element if necessary.
Be sure that all parts are clean and dry.
Reinstall filter element, and secure filter cup.
Reinstall wrapper.
OM-253555 Page 29