Miller RUNNING GEAR Manual del usuario - Página 7
Navegue en línea o descargue pdf Manual del usuario para Accesorios de soldadura Miller RUNNING GEAR. Miller RUNNING GEAR 22 páginas.
This symbol is used to call your attention to instructions
concerning your personal safety. Be sure to observe and
follow these instructions. Take time to be careful.
Before you attempt to operate this running gear, read and study the
following safety information. In addition, make sure that every individual
who operates or works with this equipment, whether family member or
employee, is familiar with these safety precautions. The Operator's Manual
warns you of dangers and should be read and observed closely.
Good safety practices dictate that you never tow an implement unless the towing
vehicle weighs at least one-and-one half (1-1/2) times the weight of the towed
implement and its load. For any public highway travel and to be in compliance
with this rule, be sure that your tractor or truck is heavy enough to counterbal-
ance the total (loaded) weight of the towed implement(s).
DO NOT travel on public highways unless adequate warning devices are used to
alert other drivers.
DO NOT drive too close to ditches or creeks; be sure surrounding ground has
adequate strength to support the weight of the loaded running gear.
DO NOT attempt to ride on the pole of the running gear.
DO NOT tow running gear faster than 20 mph.
DO NOT tow running gears in tandem on public roads.
ALWAYS use a safety or locking hitchpin.
ALWAYS keep the towing vehicle in gear when descending steep grades.
ALWAYS travel slowly around curves and along sidehills to prevent tipping.
BE SURE the tires are properly and evenly inflated at all times.
BE SURE the wheel nuts and other fasteners are kept securely tightened at all
times.
ALWAYS follow state and local regulations regarding a safety chain and auxiliary
lighting when towing farm equipment on a public highway. Be sure to check with
local law enforcement agencies for your own particular regulations. Only a
safety chain (not an elastic or nylon/plastic tow strap) should be used to retain
the connection between the towing and towed machines in the event of separa-
tion of the primary attaching system.
Block the tires, front and back, so that the running gear will not roll when discon-
necting from the towing vehicle.
SAFETY PRECAUTIONS
WARNING
3