Miller TM-4414K Manual técnico - Página 8
Navegue en línea o descargue pdf Manual técnico para Generador portátil Miller TM-4414K. Miller TM-4414K 36 páginas.
Imprimir página2-1. Symbol Definitions
Circuit Breaker
Positive
Time
3-1. Description
This belt or hydraulically-driven generator supplies ac power to the platform to run tools through an ac receptacle,
and also operate lights, and cutting and welding equipment. All power regulation components are located in a water-
tight box that is connected by cable to the generator. The generator supplies power when running at the specified
speed with the Power switch on (switch is located on platform). A 3-pole, 30 Amp circuit breaker protects the generator
from overload.
3-2. Specifications
Drive-Type
Belt-Drive/Pulley
Hydraulic
TM-4414 Page 4
SECTION 2 − DEFINITIONS
Read Operator's
Manual
Negative
h
Hours
Welding Arc
(Electrode)
SECTION 3 − SPECIFICATIONS
Single-Phase, 6 kVA/kW, 25 A, 120/240 V,
1.0 Power Factor
100% Duty Cycle
Three-Phase 7.5 kVA/kW, 18 A,
240 V, 50/60 Hz,
1.0 Power Factor
100% Duty Cycle
A
Amperes
Alternating Current
(AC)
Temperature
Work Connection
Output
50/60 Hz
V
Volts
Output
Protective Earth
(Ground)
Voltage Input
803 233
Generator Speed
3000 rpm (50 Hz)
3600 rpm (60 Hz)
Belt/Hydraulic Drive Generator