Miller Invision 352 MPa Auto-Line CE Manual del usuario - Página 37

Navegue en línea o descargue pdf Manual del usuario para Inversor Miller Invision 352 MPa Auto-Line CE. Miller Invision 352 MPa Auto-Line CE 44 páginas.
También para Miller Invision 352 MPa Auto-Line CE: Manual del usuario (48 páginas), Manual del usuario (44 páginas)

Imprimir página
Miller Invision 352 MPa Auto-Line CE Manual del usuario
SECTION 8 − MAINTENANCE & TROUBLESHOOTING

8-1. Routine Maintenance

n = Check
Z = Change
n Z l
n l
Every
3
Months
n l
n ~
Every
6
Months
n ~

8-2. Blowing Out Inside Of Unit

.
A complete Parts List is available at www.MillerWelds.com
~ = Clean
l = Replace
Replace
Damaged
Or
Unreadable
Labels
Repair Or
Replace
Cracked
Cables
Blow Out Inside
!
Disconnect power
before maintaining.
n l
.
Maintain more often during
severe conditions.
Replace Cracked
Torch Body
Repair Or Replace
Cracked Cables And
Cords
Clean
And
Tighten Weld
Connections
!
Do not remove case when
blowing out inside of unit.
To blow out unit, direct airflow
through front and back louvers as
shown.
Ref. 803691-E
OM-245171 Page 31