BURL B16-BMB2 Manual de inicio rápido - Página 3
Navegue en línea o descargue pdf Manual de inicio rápido para Media Converter BURL B16-BMB2. BURL B16-BMB2 4 páginas. Mothership
Imprimir página1.5 Install Daughter Cards
1.
Make sure the card is inserted into the card guides, and the card is properly connected
to the backplane. (Image 4)
2.
Pull cables through to the front for connection to faceplate. (Image 5) Refer to
Daughter Card Quick Start Guide for further installation instructions.
3.
Inputs 1-8 or outputs 9-16 are found in slot 1. Inputs 9-16 or outputs 1-8 are found in
slot 2 (Image 6).
Image 4: Insert the Daughter Card
into the card guides. Make sure the
metal Daughter Card backplate, not
PCB, is inserted into the card guides.
Image 6: Front view, with card slot numbers. Configuration for 8 in, 8 out.
1.7 Attach Lid With All Screws
1.8 Install Vent
Image 8: B16 MOTHERSHIP with 1U vent above for proper airflow.
Section 1
Image 5: Attach the ribbon cable
and 2 pin connector for BAD4 and
BDA8 to the front panel.
2