BURL B16-BMB2 Snelstarthandleiding - Pagina 3

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} BURL B16-BMB2. BURL B16-BMB2 4 pagina's. Mothership

1.5 Install Daughter Cards

Make sure the card is inserted into the card guides, and the card is properly connected

to the backplane. (Image 4)

Pull cables through to the front for connection to faceplate. (Image 5) Refer to

Daughter Card Quick Start Guide for further installation instructions.

Inputs 1-8 or outputs 9-16 are found in slot 1. Inputs 9-16 or outputs 1-8 are found in

slot 2 (Image 6).

Image 4: Insert the Daughter Card

into the card guides. Make sure the

metal Daughter Card backplate, not

PCB, is inserted into the card guides.

Image 6: Front view, with card slot numbers. Configuration for 8 in, 8 out.

1.7 Attach Lid With All Screws

1.8 Install Vent

Image 8: B16 MOTHERSHIP with 1U vent above for proper airflow.

Section 1

Image 5: Attach the ribbon cable

and 2 pin connector for BAD4 and

BDA8 to the front panel.