Diamond SW12 Manual - Página 2

Navegue en línea o descargue pdf Manual para Equipamiento alimentario comercial Diamond SW12. Diamond SW12 3 páginas.

Imprimir página

F .I

G E.

A Z I O N E

HANDLlNGANDTRANSPORT

The equipment

is packed on a wooden

pallette

suitable for lifting by fork lifts or

transpallette

in order to avoid possible damages. Upon request or in case of par-

ticular transport

requirements

it could be packed in a wooden

crate (photo A).

The wooden packing can be recycled. therefore

it has to be disposed in the special

waste plan for recycling. It is advisable to use a wooden

board for any handling of

the cabinet in order to avoid damages of the structure.

-Carefully

unpack the unit. paying attention so as not to damage it or throw parts andl

or accessories (i.e. screws) away.

-Check that the feet are properly fìxed.

-Take the front glass and the side glasses away from the carton packing.

-Take away the fìlm which protects the shelves and piace them. For this operation we

suggest to use working gloves.

-Piace the side glasses and fìx them with the screws included in the packing. Fit the

front glass into the special slit.

-Check that ali the protection

fìlms have been taken away from the metal sheet. as well

as from the shelves (we suggest to use working gloves).

COMPLAINTS

On receipt of the refrigerated

equipment

verify immediately. by unpacking carefully

the unit. if there are transport

damages. In case the unit is damaged in any way.

notify immediately the driver and. within 3 days. the shipping company by registered

letter.

Every complaint

must arrive at the manufacturer

within 8 days from receipt of the

equipment.

TIPO B

MTRIC(lA

~1"-t(i

DI Fi8IC

~ltT

CLASS

TtHSI~

23OV/S()iz

TtHSI~

MSS BM 18

~PRESS

ImLlO

Iml

REFRI~

Q TA' FRE~

lETTA

If:T~ITY

POT~ITA

_TI~

IMPORTANT

INSTRUCTIONS

AND

SUGGESTIONS

Before using the equipment

it is important

to read these instructions

carefully as

improper

use can be dangerous. Before connecting the refrigerated

unit, make sure

that the power supply voltage is as indicated on the label (photo C). The equipment

MUST be connected to a grounded power socket, in compliance with the current

legislation to satisfy the safety requirements.

For usage of the unit, as every electrical device, basic rules have to be followed:

-do not touch or plug the equipment with damp or wet hands or feet;

-do not pull the electric cable to unplug it;

-do not expose it to the atmospheric

agents;

-do not allow children to use it without

adult supervision;

-before

starting

any cleaning

or maintenance

operation.

it is necessary

to unplug

the equipment

and do not attempt

to make

any modification.

WORKING

TEMPERATURE

This equipment

is manufactured

in conformity

with

the ambient

conditions

climatic class 3 (25° C -60%

R.H.) EN 441-4. The refrigerated

unit maintains its

performance

characteristics

with an ambient temperature

and relative humidity

no more than: +25°C and 60% R.H. ( relative humidity).

In case the ambient condi-

tions are not included in the above mentioned

ones. a lower performance

must be

expected.

CLEANING

Before switching on the unit. clean the equipment

thoroughly.

both inside and out-

side. using warm water and a solution

of bicarbonate

of soda ( I tea spoon every

2 liters) or white vinegar. Carefully dry the unit with a soft cloth. Never use metal

pads or abrasive substances. Never use sharp objects; any damage resulting from the

use of these objects will not be covered by warranty.

ElECTRICAl

POWER

I CONNECTION

First of ali. make sure that there is an efficient ground system in compliance with the

current legislation regarding electrical

safety. When in doubt. request a careful check

from a qualified technician. The unit is equiped with the plug and the electrical cable

mod. Schuco (photo D).

I -verify

that the power supply voltage is as indicated on the machine rate plate

(photo C -23OV SO Hz monophase)

2 .in

case of incompatibility

between

the socket

and the plug of the unit.

the plug should

be replaced

with

a suitable

one by a qualified

technician

3 -do not connect any other appliance to the same power socket

4 -do

not pull the electrical

cable or the unit to unplug the equipment

from the

socket (photo E)

S -pay attention

that the power supply cable is laid in such a way as to prevent it

from being damaged or becoming hazardous to people and things.

THE MAIN

POWER SUPPLY LlNE CAN

BE ALTERED ONLY

BY A QUALIFIED

TECHNICIAN.

6 -in case the power supply cable is damaged. it should be replaced only by a qua-

lified technician.

INSTALLATION

The refrigerated

unit must be installed in a suitable dry piace and on a level f1oor.

to avoid an higher energy consumption

and a shorter

compressor

life. It must be

installed on a level f1oor to prevent noise and bad working.