Burndy YCP39L Series Manual de seguridad y funcionamiento

Navegue en línea o descargue pdf Manual de seguridad y funcionamiento para Cables y conectores Burndy YCP39L Series. Burndy YCP39L Series 2 páginas. Compression pulling grips

Imprimir página

SAFETY OPERATION MANUAL INSTRUCTIONS

FORM 50073344

REVISION H

Safety And Work Load Factors

Compression pulling grips are single use for pulling electrical cable. They are easy and fast

to install, providing the user with a slim profile that allows for easy passage through ducts

and conduit.

It is very important to comply with all the following precautions. Failure to do

Caution

so may result in property damage, personal injury or death.

1. Pulling grips are to be installed by a qualified individual in accordance with all

applicable national and local safety, electrical and rigging codes, as well as per the

BURNDY

installation requirements.

2. Ensure that the correct grip is selected for your specific needs.

3. DO NOT use a pulling grip for any application other than pulling cable.

4. Thoroughly examine the grip for damage. DO NOT use a damaged grip.

5. Ensure that the recommended work load of the grip is suitable for the application.

Never use grips at their approximate rated breaking strength.

6. DO NOT alter grips in any way.

7. DO NOT attach any type of pulling hardware to any point on the grip other than the pulling

eye. The pulling eye is the only acceptable means of attachment to external hardware.

The broad application of compression grips on a variety of cable requires that adequate safety

factors be used to establish working loads. The approximate breaking strength of a

COMPRESSION grip represents an average calculation based on data established from

actual direct tension testing done in our engineering laboratories, see table below for

maximum rated pulling load.

It is impossible to catalog or guarantee a safety factor suitable for all applications as operating

conditions are never the same. The tension, diameter, movement, number of objects gripped,

gripping surface, and the attachments used are just some of the factors which vary with each

application. These factors, together with the effects of abrasion, corrosion, or abuse and any

other variables of a specific application, must be considered by the user and grip replaced as

appropriate. Where the conditions of the application are not well defined or known, or where

risk of injury to person or property is involved, a greater safety factor should be utilized.

Any warranty as to quality, performance or fitness for the use of grips is always premised on

the condition that the published breaking strengths apply only to new, unused grips, and that

such products are properly stored, handled, used, maintained and inspected by the user for

the use and condition of the grip.

BURNDY

Compression Pulling Grips

Single-use compression cable pull product line is designed with the following Features & Benefits:

1. Range Taking With Dieless Tools

2. Accommodates (See table for specific wire combinations).

3. Parallel - Each compression grip comes in various lanyard length sizes

for pulling multiple cables simultaneously.

4. Crimp Bands - Crimp marks for easy crimp locations.

Installation Instruction Support

Scan QR Code for installation videos and sales documentation.

Copper

Aluminum

Catalog

(Concentric

Wire Size

Number

Compress

Compact) Wire

#8 AWG

130

YCP4CL-

#6 AWG

210

#4 AWG

300

#4 AWG

300

#3 AWG

400

YCP25L-

#2 AWG

500

400

#1 AWG

1,200

400

1/0 AWG

1,200

400

2/0 AWG

1,200

400

YCP28L-

3/0 AWG

2,000

750

4/0 AWG

2,000

1,000

250 KCMIL

2,000

1,200

YCP31L-

300 KCMIL

4,000

1,500

350 KCMIL

4,000

1,800

400 KCMIL

4,000

2,000

450 KCMIL

5,000

2,400

YCP34L-

500 KCMIL

5,000

2,700

550 KCMIL

5,000

3,600

600 KCMIL

5,000

3,600

YCP39L-

650 KCMIL

5,000

3,600

700 KCMIL

5,000

3,600

750 KCMIL

5,000

3,600

900 KCMIL

5,000

3,600

YCP44L-

1,000 KCMIL

5,000

COMPRESSION CABLE PULLING GRIPS

Copper

Aluminum

Dieless tools Y/

Copper

(Concentric

PAT644

(Compact)

Compress)

Compress

(# Crimps)

Wire ONLY

Compact) Wire

Y / PAT644 (1) Y /

PAT444S (1)

Y / PAT644 (1)

1,200

550

400

Y / PAT644 (2)

2,000

1,000

Y / PAT644 (3)

4,000

1,400

1,800

Y / PAT644 (3)

5,000

2,200

2,700

Y / PAT644 (3)

5,000

2,200

3,600

Y / PAT644 (3)

5,000

2,200

5,000

Y / PAT750 Y /

Min Wire Strip

PAT46

Length

(# Crimps)

1.38"

2.50"

U25RT (1)

2.50"

3.00"

U28RT (2)

3.00"

3.25"

U31RT (3)

3.25"

U34RT (3)

3.25"

U39RT (3)

3.25"

U44XRT (3)

3.25"