3C-Link 3C-MC-R16 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Chasis 3C-Link 3C-MC-R16. 3C-Link 3C-MC-R16 6 páginas. For 2u unmanagement converter chassis

maximum flexibility and redundancy. In this way, you may remove any

of the two power supplies without turning off the system.

♦Redundancy

During operation, both power supplies are switched on and share the

current load. In case that one of them should fail, the other will

instantaneously take 100% of the load without any loss. Similarly, if

one power supply is removed from servicing, it can be switched off

and removed while the chassis continues functioning.

♦Protection System

The power of each converter bay comes from the two shared power

supplies. Each bay is isolated from each other under a certain

protection mechanism, so that it is free from any problem that might

occur to the power supplies or faulty converter bay. This is the best

solution to protect your investment in media converters.

CONNECTING TO POWER

The chassis system is equipped with two power supplies.

Step 1: Connect the supplied AC power cord to the receptacle on the front

panel of each power supply.

Step 2: Attach the plug into a standard AC outlet with a voltage range from

100~240Vac.

Step 3: Turn on the chassis system by flipping the ON/OFF switch beside

the receptacle to ON position. The LEDs on the front panel of the

media converter chassis system will come on then.

The chassis system can hold two power supplies and up to14 media

converters, and therefore, it is necessary to provide a good cooling

system and so to achieve obtain adequate ventilation. The chassis is

equipped with two hot-swappable power supplies with fans at the rear.

The chassis is also equipped with one fan on the left and right side of the

chassis.

CHASSIS SYSTEM Capacity Sixteen bays for housing up to 16 media

converters

Power Two power supplies provided, hot-swappable

Cooling Two power supplies with fans One fan on the left and the other

one on the right side of the chassis

Dimensions W440 mm × D276 mm × H90 mm Standard 19" size, 2 U

Power Supply Power Input 110~240Vac, 50~60Hz or -48Vdc

Operating Temperature 0°C to 40° C (32°F to 104°F)

Storage Temperature -25°C to 70°C (-13°F to 158°F)