3C-Link 3C-MC-R16 Manual do utilizador - Página 5
Procurar online ou descarregar pdf Manual do utilizador para Chassis 3C-Link 3C-MC-R16. 3C-Link 3C-MC-R16 6 páginas. For 2u unmanagement converter chassis
Imprimir páginamaximum flexibility and redundancy. In this way, you may remove any
of the two power supplies without turning off the system.
♦Redundancy
During operation, both power supplies are switched on and share the
current load. In case that one of them should fail, the other will
instantaneously take 100% of the load without any loss. Similarly, if
one power supply is removed from servicing, it can be switched off
and removed while the chassis continues functioning.
♦Protection System
The power of each converter bay comes from the two shared power
supplies. Each bay is isolated from each other under a certain
protection mechanism, so that it is free from any problem that might
occur to the power supplies or faulty converter bay. This is the best
solution to protect your investment in media converters.
CONNECTING TO POWER
The chassis system is equipped with two power supplies.
Step 1: Connect the supplied AC power cord to the receptacle on the front
panel of each power supply.
Step 2: Attach the plug into a standard AC outlet with a voltage range from
100~240Vac.
Step 3: Turn on the chassis system by flipping the ON/OFF switch beside
the receptacle to ON position. The LEDs on the front panel of the
media converter chassis system will come on then.
Cooling system:
The chassis system can hold two power supplies and up to14 media
converters, and therefore, it is necessary to provide a good cooling
system and so to achieve obtain adequate ventilation. The chassis is
equipped with two hot-swappable power supplies with fans at the rear.
The chassis is also equipped with one fan on the left and right side of the
chassis.
Type Application:
Specifications
CHASSIS SYSTEM Capacity Sixteen bays for housing up to 16 media
converters
Power Two power supplies provided, hot-swappable
Cooling Two power supplies with fans One fan on the left and the other
one on the right side of the chassis
Dimensions W440 mm × D276 mm × H90 mm Standard 19" size, 2 U
Power Supply Power Input 110~240Vac, 50~60Hz or -48Vdc
Operating Temperature 0°C to 40° C (32°F to 104°F)
Storage Temperature -25°C to 70°C (-13°F to 158°F)